EleksMaker® EleksLaser A3X-2500mw Laser Engraving Machine CNC Laser Printer
- List PriceUS$399.00piece
- Sale PriceUS$399.00piece
- ShippingFree Shipping
How to Assemble The Laser Machine (New Version):
There Are Two Videos Showing How to Assemble The old version Laser Machine:
|Control Board||EleksMana SE|
|Laser Quick Replace||Support|
|Sysytem Support||Win XP/7/8/10|
|Engrave Mode||Photo, Word, Scan, outline, Pixel Laser Engraving|
|Supported Formats||jpg, bmp, svg, G-code|
|Material||Stainless Steel and Acrylic|
|Working Voltage||DC 12V|
|Working Current||DC 2.5A|
|Laser Power||Not include laser module|
|Control Software System||Candle, EleksCam, T2-Laser, Benbox, GrblController,|
LiteFire, Laser GRBL, etc.
|Engraving Area||30x40cm / 11.81 x 15.75inch (maximum)|
|Engraved object height limitatiion||No Limitation|
|Packaging Size||58x40x14cm / 22.83x15.75x5.51inch (L*W*H)|
|Assembled Product Size||60x46x18cm / 23.62x18.11x7.09inch (L*W*H)|
|Certification||CE, FCC, FDA(Please contact us if you need them)|
|Function||ideal for amateur laser engraving usage low-light|
positioning and freedom positioning functions.
|Features||30X40cm ultra large engraving area,gantry shape design,|
no engraving height limitation.
|Three stepper motor drive providing faster moving speed.|
|can print any pictures easily|
|Aluminum Stick||5||M6x15 Inner-hexagon Screws||12|
|Acrylic Board||9||M5x10 Inner-hexagon Screws||8|
|Stepper Motor||3||M5x10 Inner-hexagon Screws||8|
|Motor Drum in-phase||3||M5x30 Inner-hexagon Screws||10|
|M5x50 Inner-hexagon Screws||5|
|Corner Fitting||4||M3x16 Inner-hexagon Screws||4|
|Driver Board||1||M3x12 Inner-hexagon Screws||14|
|Synchronous Belt||1||M3x12 Module Fitting Screws||4|
|12V Power Adapter||1||M5x10 Nylon Column||20|
|USB Data Cable||1||M3x4 Nylon Column||4|
|Goggles||1||M3 Screw Nuts||4|
|Motor Cable||3||M5 Screw Nuts||35|
|Cable Slot||2||POM Bearing Wheel||15|
|Belt Clip||6||Parts Box||1|
You can know more about installation, software , software setting ,operating instructions and normal questions
through this wiki link: Click here
The EleksCAM Instruction and software download link is here: Click Here
The benbox Instruction downloading link is: Click Here
1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin!
2. This is a whole assemble set and needs to assemble by your own.
3. If you have any quality problem about the machine, please feel free to contact us. Many operative problem can be solved according
to your video. It can effectively save your time and energy if you send the video to us with the problem description. Thank you in advance.
1x Laser Engraver Assembling Kits (Without laser module)
1. How to assemble the kit?
The whole assemble and operating manual link is here:Click here
You can also watch the video to do it:Click here
2. What software can support this machine? And what image format? Engrave Mode?
Supported Software: EleksCam,Candle, T2-Laser, Benbox, GrblController, LiteFire, Laser GRBL, etc.
Supported Image Format: jpg, bmp, svg, G-code
Supported Engrave Mode: Photo, Word, Scan, Outline, Pixel Laser Engraving
3. What system can the EleksCAM support?
PC Win XP 7/8/10 , Laptop is ok,too.
4. My laser doesn't work, what should I do?
If the machine does not work, it might because:
① The wire connection is wrong.Please check the connection like the picture shown.
② Your computer could not support the software.Please use Win XP 7/8/10 to check it.
③ Software problem.Please check whether wires are inserted rightly. And then check your data setting.
④ The kit misses some accessories.Please compare with the instruction and tell us, we will solve it once you send us the email.
⑤ Driver board/power supply is broken.Please check which part is the main problem,and then send us a video to prove it.
Or you can send us a video about your software setting,working laser and driver board. We will analyze it and give you a solution.
5: My software shows: Not data, what should I do?
There might be two reasons.
① You did not open Administrator privileges to run the software. Please try this.
② Your computer architecture is incomplete:check whether VC ++ and. Net and directX are installed, and have to turn off the virus.
6. Can I regulate the laser power or the laser power is adjustable?
Our new Mana SE controller board can adjust the power. Please download our ElekesCAM software and firmware to do it.Or benbox software and benbox firmware.
Please note that two firmware is not the same.Details are shown in the EleksCAM & Benbox software instruction above.
7. Can I upgrade stronger power laser module by myself? Can I extent rail frame?
Yes,you can.DC12V laser module can be installled on this machine. The red is positive.You can also extent the frame by yourself,
but we do not provide rails. Please note that.
8.When I click arrows to control the motors, it works. But when I begin to make it work with EleksCAM software,
it does not move. What should I do?
The EleksCAM could move by hand but could not move when focus.The probelm is the area and language inside the system control panel.
Please set the format to English and United States.Then it will be ok. Detail is shown in the wiki link above.
9. If my laser is broken and I might find the reason(Or I could not find) . What should I do?
① Find the reason: Take a video to prove the part is broken and then send it to us. we will give you a solution according to your video.
② Could not find the reason : Check the Question 4 first. If the problem could not be solved, please feel free to contact our customer
service with a video: [email protected]. The video should contain software setting, broken part details and the power-on machine.
We will solve it asap.